On November 21, 2026 we made a new 4-button remote head key for a 2007 Chrysler PT Cruiser in a Carmel Mountain Ranch parking lot. The key was cut in our van, programmed to the car, tested in the door and the ignition, and handed to the owner on the spot. No tow and no dealer visit.
How the job went
-
1Cut the blade in the van
The PT Cruiser takes a remote head key: the blade, the chip and the buttons are all one piece. A new blank went into the jaw of our Xhorse key machine in the van and the blade was cut right there in the lot.
-
2Check the cut in the door lock
A fresh blade gets checked in a real lock before anything else. The new key went into the PT Cruiser door lock to confirm the cut.
-
3Program it and start the car
The chip and the remote buttons in the new key were programmed to this car. Then the test that counts: key in the ignition, gauges up, engine running.
-
4Hand it to the owner
The finished key went straight to the owner in the parking lot, on one of our key tags so the number is there if a spare is ever needed.
The key this car takes
| Key type | Remote head key |
|---|---|
| Buttons | 4: Lock, Unlock, Hatch, Panic |
| FCC ID | OHT692427AA |
| Frequency | 315 MHz |
| Battery | CR2032 |
- The third button, marked x2, is the hatch release. It takes a double press, which is why the icon says x2.
- The remote runs on one coin battery. When the range starts dropping, the battery is the first thing to change, not the key.
Prices and every other key option for this car are on the 2007 Chrysler PT Cruiser key page.
More photos from this job




Where this was
This job was in Carmel Mountain Ranch, part of San Diego. We come to you there and in Rancho Bernardo and Poway next door, seven days a week, across San Diego County.
