Chrysler Voyager Key Replacement (2020-2022) in Ventura County

No. The 2020-2022 Voyager smart key system does not support any form of self-programming. Older Chryslers sometimes let you use a two-key procedure to add a spare, but that does not work here. Your Voyager uses SKIM with server authentication, which requires professional diagnostic equipment to communicate with the immobilizer. Give us a call at (805) 790-8162 and we handle the whole thing on-site.

CR2032. It is a standard coin cell you can find at any drugstore. Most Voyager owners need to swap it every 12 to 18 months, though heavy use of remote start and power door buttons can drain it faster. To replace it, insert a coin into the slot on the side of the fob, twist gently to separate the halves, and swap the battery with the positive side facing up. If your buttons still do not respond after a fresh battery, the fob may have internal contact damage and you should call us at (805) 790-8162.

It depends. Start by putting a fresh CR2032 in the fob. If lock, unlock, and the power doors still work fine but remote start does not, the fob is probably not the problem. That points to the vehicle's receiver module or an engine immobilizer communication issue, which may need dealer diagnosis. If multiple buttons are dead, the fob itself likely needs replacement or repair. Either way, call us at (805) 790-8162 and we can help you figure out which one it is before you spend money in the wrong place.

Yes, we can help with this, and we know it is stressful. All-keys-lost on a Voyager means the immobilizer needs a full reset and a new key programmed from scratch. The dealer will charge $300 to $600 and you will wait days for parts. We come to you, handle the server authentication and programming on-site, and typically finish the same day. You will need proof of ownership and a valid ID. Call us at (805) 790-8162 and we will get you back on the road.