Nissan Cube Key Replacement (2009-2014) in Ventura County

The real question is not whether you can, but which part you are trying to program. If you have a base or S trim with the standard remote head key, you can pair the remote buttons yourself using a door cylinder sequence, as long as you have one working key. But the transponder chip that actually starts the engine requires OBD-II diagnostic equipment and a PIN code. SL models with the Intelligent Key need professional programming no matter what. We handle both for $150 to $250, on-site anywhere in Ventura County. Call us at (805) 790-8162.

Yes. The 2012-2014 SL and Krom trims come with Nissan's Intelligent Key system, which means push-button ignition and proximity entry. You keep the fob in your pocket, press the brake, and hit the start button. If you are not sure which trim you have, check whether there is a key slot in the ignition. No slot means push-button start. We cut and program both OEM and aftermarket Intelligent Key fobs on-site.

CR2032. Every Cube fob from 2009 through 2014 uses the same battery, whether it is a remote head key or a smart key. A dead battery is the most common reason the remote buttons stop working while the key still starts the car. Pop the fob open with a coin, swap the battery with the positive side facing down, and snap it back together. We stock CR2032 batteries and test your fob during any service call.

Here is what is actually happening: on the Cube, transponder programming and remote pairing are two completely separate processes. Getting the chip programmed so the engine starts does not automatically pair the lock and unlock buttons. After the transponder is done, you still need to run a door cylinder sequence to pair the remote. Lock all doors, insert the key, cycle the ignition, and press the buttons within five seconds. If that sounds like a hassle, we handle both steps together on every call. Our tools pair the transponder and remote in one visit so you do not have to deal with it.