Nissan 370Z Key Replacement in Ventura County

It depends on what you mean by program. You can pair the remote lock and unlock buttons yourself using a key-cycle procedure in the ignition. But the transponder chip, the part that actually lets the car start, requires NATS immobilizer programming with diagnostic tools. That is the part you cannot do at home. We cut the high-security blade and program the full smart key on-site for any 2009 to 2020 Z34. Your fob holds up to 4 keys total. Call us at (805) 790-8162 and we will get it done.

Start with the emergency blade. Slide it out from the back of your 3-button smart key, then use it to unlock the driver's door manually. There is a small rectangular cap behind the door handle that pops off to reveal the keyhole. Once inside, hold the dead fob directly against the START/STOP button while pressing the brake, and the car will start. Swap in a fresh CR2032 battery and all your proximity functions come right back. If the fob still is not working after a new battery, the NATS immobilizer may need reprogramming, and that is where we come in.

Yes, every single one. All 2009 to 2020 370Z models came standard with Nissan's Intelligent Key system and push-button start. Just keep the smart key in your pocket or the center console and press the button. The car will warn you if you try to leave with the fob still inside. If your push-button start stops responding, it is usually a dead fob battery or an immobilizer sync issue, both things we fix on-site.

Here is the honest answer: no. OEM replacement fobs like the 285E3-1ET5A ship without the emergency blade inside. Aftermarket blanks usually skip it too. We cut compatible high-security blades on-site for your Z34, so when you get a key from us, you get the complete package: fob, blade, programming, and testing. One stop, everything done, right in your driveway in Ventura County.