2002 Honda Passport
Key Replacement - Save vs Dealer in Ventura County

Q: What kind of key does a 2002 Honda Passport actually use?

It's a straight metal key. No remote, no buttons, no fob battery to replace. It fits the door locks, the ignition, and the rear gate lock. Replacement is a cutting job, not a programming job. Bring a working key for duplication, or if you're locked out or down to zero keys, the lock can be decoded directly to cut a new one.

Q: I'm getting a warning that my key isn't being recognized. What's going on?

On a 2002 Passport, there's no electronic key detection system to trigger that kind of warning. If the engine won't start, the issue is almost always mechanical: wrong key cut, a worn key that's slipping in the ignition, a worn ignition cylinder that's not reading the cuts cleanly, or a steering column lock that didn't release fully. Check that the steering wheel isn't locked up tight against the column before you try to turn the key again.

Q: I lost both keys for my 2002 Passport. Can a new key still be made without the original?

Yes. All-keys-lost on a mechanical key vehicle is not the headache it is on newer cars. There's no key memory to reset and no programming sequence required. I can decode the lock cylinder directly, generate the correct key cut, and have a working key cut on site. The door lock or ignition cylinder gives up the cut information through decoding tools, so the missing originals don't hold the job up.

Q: The ignition on my Passport feels loose and the key sometimes doesn't turn cleanly. Do I need a new ignition or just a new key?

Usually it's the key, not the cylinder, but it depends on which is worn. After two decades, the key blade wears down from repeated use and starts losing the sharp edge definition the wafers inside the cylinder need to read correctly. A fresh key cut to the original code can fix what feels like an ignition problem. That said, if the cylinder itself is worn or the wafers are damaged, a new key won't fix the sloppiness.

Same-Day Service | No Towing Required

Available

Metal Key

Need your key replaced today? We offer same-day mobile service with an average arrival time of 20-30 minutes. Most keys are cut and programmed in under 45 minutes.

CA BSIS LICENSE LCO#6792

Same-Day Service Done in Under 1 Hour Fast Response Time

Fast Response15-25

min arrival

1,400+reviews

Call (805) 790-8162 Text Us

Professional 2002 Honda Passport locksmith quote from EZ Car Keyz Ventura CA

Fast Response

Average arrival time: 15-25 minutes

Same-Day Service

Call now, get your key today - no waiting days

Done in Under 1 Hour

Key cut and programmed in 20-45 minutes

805 Special

10% OFFCODE:EZ-805-2026

🔥 Fast keys, plus 10% off today 🔥

REDEEM (805) 790-8162

2002 Honda Passport
Key Options

Dealer-grade key for a fair, honest price

Metal Key

Honda Passport Key: Same-Day vs Days of Waiting

Same-day vs days of waiting - the choice is clear

EZ Car Keyz

Dealership

Average Cost

✓ $$

✕ $$$$

Location

✓ We come to you

✕ You drive there

Wait Time

✓ 20-45 min

✕ 2-5 days

Same-Day

✓ Yes

✕ Rarely

All Keys Lost

✓ No problem

✕ Tow required

OEM Quality

✓ Yes

EZ Car Keyz wins 5 out of 6

Done in minutes, not days

Book Service (805) 790-8162

2002 Honda Passport Metal Key Replacement - Fast, Affordable & Professional

I was out in Pierpont on a Tuesday morning, parked a block off the beach, when a guy flagged me down from across the street. Turned out he lived a few houses in from the water and had just snapped his only key for his 2002 Passport. Half the blade was still in his hand. The other half was wedged in the door lock.

He'd already tried to fish it out himself with a pen cap. That never works, and it usually makes it worse. It had pushed the broken piece a little deeper.

I extracted the broken blade from the door cylinder without pulling the lock, which saved him the longer job. Once it was out I had both pieces, which actually helped because the cut pattern was still readable. I decoded it right there, cut a new key blade on my machine in the van, and confirmed the fit in every lock and the ignition before I called it done.

He mentioned a shop had quoted him a two-day turnaround because they wanted to order a key from a supplier. I had him back inside his house and his car running in under an hour. Dealer didn't even come up.

Save vs the Dealer on Your Honda Passport Key

Get your key for hundreds less than the dealer. Same quality, same result, better price.

Get Pricing (805) 790-8162 Text Us

BSIS Licensed

LCO#6792

CA Bureau of Security & Investigative Services

NASTF Certified

National Automotive Service Task Force

Fully Insured

Liability & vehicle damage coverage

Google Guaranteed

Verified & backed by Google

Also serving: Casitas Springs · College · Downtown Ventura · East Ventura

Honda Passport Rapid Response, Done Right

Rapid response in the field

2002 Honda Passport

Metal Key | Done in Minutes

Fast Dispatch

Rapid Arrival

Available Today

Ventura

Rapid Service Zone

805 Area

Same-Day Keys (805) 790-8162

Honda Customers Love Our Fast Service

Same-day service, five-star results

D

Don J.

May 2024

★★★★★

“Super friendly and efficient service!! Best locksmith in the area by FAR. Will use them if I ever need another key made for my Honda Element! 10/10”

Google Review

D

Darlene M.

Jan 2026

★★★★★

“Tim did a really good and fast job on my Honda ! Also best prices in the town ! :) I will definitely be recommending this business to friends and family”

Google Review

V

Vicky L.

Aug 2024

★★★★★

“Had an awesome experience very friendly and very fast service would def recommend”

Google Review

Certified locksmith review for 2002 Honda Passport service by EZ Car Keyz Ventura CA

★ 5.0 out of 5 - Based on Over 1,400 five-star Google reviews

Best Price (805) 790-8162

Honda Passport Mobile Service FAQ

Real costs, no dealer surprises

My key broke in the ignition. Can you get it out?▼

Yes, and it's one of the more common calls on older Hondas. The Passport shares its lock hardware with other vehicles from that era, and after twenty-plus years the keys wear down and can snap under normal turning pressure, especially if someone forced a stiff cylinder. The process is extraction first, then a new key. I use purpose-built extraction tools to pull the broken piece without damaging the cylinder.